Before you begin – Motorola Communications Gateway User Manual
Page 12
7
Communications Gateway User Guide
X
Home
Exit
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
Before You Begin
Before you begin the installation, check that you received the following items with your
Motorola Communications Gateway:
with F-type connectors to connect your
Communications Gateway to the nearest cable outlet. If a TV is connected to the cable
outlet, you may need a 5 to 900 MHz RF
to use both the TV and the
Communications Gateway. Both the coaxial cable and the RF splitter are readily
available at consumer electronic stores.
Item
Description
Power cord
Connects to the AC electrical outlet
10/100Base-T
Ethernet cable
Connects to the
port
USB cable
Connects to the
port
Phone wire
Connects a telephone line
Motorola
Communications
Gateway CD-ROM
Contains the User Guide, USB
, and other
items supporting your Communications Gateway