Motorola Netopia 3397GP - Manual (Page 131)

131
netstat -i
Displays the IP inter faces for your Motorola Netopia® Gateway.
netstat -r
Displays the IP routes stored in your Motorola Netopia® Gateway.
nslookup [ hostname | ip_address ]
Per forms a domain name system lookup for a specified host.
◆
The hostname argument is the name of the host for which you want DNS information; for example,
nslookup klaatu .
◆
The ip_address argument is the IP address, in dotted decimal notation, of the device for which
you want DNS information.
ping [-s size ] [-c count ] [ hostname | ip_address ]
Causes the Motorola Netopia® Gateway to issue a series of ICMP Echo requests for the device with the
specified name or IP address.
◆
The hostname argument is the name of the device you want to ping; for example, ping ftp.neto-
pia.com .
◆
The ip_address argument is the IP address, in dotted decimal notation, of the device you want to
locate. If a host using the specified name or IP address is active, it returns one or more ICMP Echo
replies, confirming that it is accessible from your network.
◆
The -s size argument lets you specify the size of the ICMP packet.
◆
The -c count argument lets you specify the number of ICMP packets generated for the ping
request. Values greater than 250 are truncated to 250.
You can use the ping command to determine whether a hostname or IP address is already in use on
your network. You cannot use the ping command to ping the Motorola Netopia® Gateway’s own IP
address.
quit
Exits the Motorola Netopia® Gateway command line inter face.
reset arp
Clears the Address Resolution Protocol (ARP) cache on your unit.
reset atm
Resets the Asynchronous Transfer Mode (ATM) statistics.
reset cdmode
This command will set up one boot flag so that the next time a 3342N/3352N restar ts or reboots
(power cycle), the Gateway will boot into CD-ROM mode instead of Gateway mode.