Motorola Netopia 3397GP User Manual
Page 65
65
The IP Subnets screen allows you to configure up to seven secondar y subnets and their DHCP
ranges, by entering IP address/subnet mask pairs:
☛
Note:
You need not use this screen if you have only a single Ethernet IP subnet.
This screen displays seven rows of editable columns. All seven row labels are always visible, regard-
less of the number of subnets configured.
◆
To add an IP subnet, select one of the rows, and click the
Edit
button.
Check the
Enabled checkbox and click the
Submit
but-
ton.
The screen expands to allow you to enter subnet infor-
mation.
If
DHCP Server (see
) is
not enabled, the DHCP Star t Address and DHCP End
Address fields do not appear.
◆
Enter the Router’s IP address on the subnet in the
IP
Address field and the subnet mask for the subnet in
the
Netmask field.
◆
Enter the
DHCP Start Address and End Address
of the subnet range in their respective fields.
Ranges cannot overlap and there may be only one range per subnet.
◆
Click the
Submit
button.
To delete a configured subnet, set both the IP address and subnet mask values to 0.0.0.0, either
explicitly or by clearing each field and clicking the
Submit
button to commit the change.
☛
NOTE:
All additional DHCP ranges use the global lease period value. See
.