Motorola Netopia 3397GP - Manual (Page 175)

175
set queue name "wfq" entry 4 weight 40000
set queue name "wfq" entry 4 share-bw off
set queue name "wfq" entry 4 limit-bw off
set queue name "wfq" default-input "basic_q0"
Priority Queue
set queue name priority_queue_name option [ off | on ]
set queue name priority_queue_name type priority
set queue name priority_queue_name reserve-bps reserve_bps_value
set queue name priority_queue_name default-input queue_name
A priority queue can contain up to 8 input queues. For each input queue, the following is configured:
set queue name priority_queue_name entry n
input input_queue_name
set queue name priority_queue_name entry n priority priority_value
Specifies the Priority Queue named priority_queue_name attributes.
◆ priority_queue_name – name of priority queue
◆ input_queue_name – name of input queue
◆ priority_value – numeric relative priority of queue.
◆
reserve_bps_value – minimum guaranteed bandwidth for a priority queue entry. Example: If a low
priority queue has a reserve-bps of 512000bps, and the link is getting saturated with a higher pri-
ority queue, the low priority queue will still use 512kbps.
☛
The lower the number, the higher the priority of the queue.
◆ default-input – specifies the default input queue name.
By default, the following priority queue is created:
set queue name "pq" option on
set queue name "pq" type priority
set queue name "pq" entry 1 input "basic_q0"
set queue name "pq" entry 1 priority 10
set queue name "pq" entry 1 reserve-bps 0
set queue name "pq" entry 2 input "basic_q1"
set queue name "pq" entry 2 priority 20
set queue name "pq" entry 2 reserve-bps 0
set queue name "pq" entry 3 input "basic_q2"
set queue name "pq" entry 3 priority 30
set queue name "pq" entry 3 reserve-bps 0
set queue name "pq" entry 4 input "basic_q3"
set queue name "pq" entry 4 priority 40
set queue name "pq" entry 4 reserve-bps 0
set queue name "pq" default-input "basic_q0"