Motorola Netopia 3397GP - Manual (Page 7)

7
CHAPTER 1 Setting up Your Motorola Netopia
®
Gateway
This Administrator’s Handbook covers the advanced features of the Motorola Netopia
®
2200- 3300-
and 7000-Series Gateway family.
Your Motorola Netopia
®
equipment offers advanced configuration features accessed through the Web-
based inter face screens and the Command Line Inter face (CLI). This Administrator’s Handbook docu-
ments the advanced features, including advanced testing, security, monitoring, and configuration. This
Administrator’s Handbook should be used as a companion to the User Manual . You should read the
User Manual before reading this Administrator’s Handbook .
This guide is targeted primarily to residential ser vice subscribers.
Exper t Mode sections and the Command Line Inter face may also be of use to the suppor t staffs of
broadband ser vice providers and advanced residential ser vice subscribers. (See “Exper t Mode” on
page 55” and “Command Line Inter face” on page 123 .”)
Most users will find that the basic Quickstar t configuration is all that they ever need to use. This sec-
tion may be all that you ever need to configure and use your Motorola Netopia
®
Gateway. The following
instructions cover installation in Router Mode .
◆
“Impor tant Safety Instructions” on page 8
“Wichtige Sicherheitshinweise” on page 9
◆
“Set up your Gateway” on page 10
◆
“Configure Your PC for Dynamic Addressing” on page 11
◆
“Motorola Netopia® Gateway Quickstar t” on page 14
What’s New in 7.8.4
◆
LAN/WAN Turnaround is now suppor ted on all models. See “LAN/WAN” on page 63 .
◆
VDSL2 WIAD Voice suppor t. See “VoIP” on page 81 .
◆
Configurable SIP for warding path via CLI. See “VoIP settings (supported models)” on page 221 .
◆
VDSL2 Modem firmware Set IP Gateway command. See “Default IP Gateway Settings” on page 164 .