Motorola Netopia 3397GP - Manual (Page 182)

Administrator’s Handbook
182
Configuring Port Authentication. You can use the following command to specify how your Motorola
Netopia® Gateway should respond when it receives an authentication request from a remote peer.
The settings for por t authentication on the local Motorola Netopia® Gateway must match the authenti-
cation that is expected by the remote peer. For example, if the remote peer requires CHAP authentica-
tion and has a name and CHAP secret for the Motorola Netopia® Gateway, you must enable CHAP and
specify the same name and secret on the Motorola Netopia® Gateway before the link can be estab-
lished.
set ppp module [vcc n ] port-authentication
option [ off | on | pap-only | chap-only ]
Specifying on turns both PAP and CHAP on, or you can select PAP or CHAP. Specify the username and
password when por t authentication is turned on (both CHAP and PAP, CHAP or PAP.) Authentication
must be enabled before you can enter other information.
set ppp module [vcc n ] port-authentication username username
The username argument is 1 – 255 alphanumeric characters. The information you enter must match
the username configured in the PPP peer's authentication database.
set ppp module [vcc n ] port-authentication password password
The password argument is 1 – 128 alphanumeric characters. The information you enter must match
the password used by the PPP peer.