Motorola Netopia 3397GP - Manual (Page 136)

Administrator’s Handbook
136
show ip state-insp
Displays whether stateful inspection is enabled on an inter face or not, exposed addresses and blocked
packet statistics because of stateful inspection.
show ipmap
Displays IPMap table (NAT).
show log
Displays blocks of information from the Motorola Netopia® Gateway diagnostic log. To see the entire
log, you can repeat the
show log command or you can enter show log all.
show memory [all]
Displays memor y usage information for your Motorola Netopia® Gateway. If you include the optional all
argument, your Motorola Netopia® Gateway will display a more detailed set of memor y statistics.
show pppoe
Displays status information for each PPPoE socket, such as the socket state, ser vice names, and host
ID values.
show rootcert
Dumps the Subject line for the list of all the trusted root cer tificates for the supplicant, which is cur-
rently a superset of the OpenSSL trusted root cer tificates.
show rtsp
Displays RTSP ALG session activity data.
show security-log
Displays blocks of information from the Motorola Netopia® Gateway security log.
show status
Displays the current status of a Motorola Netopia® Gateway, the device's hardware and software revi-
sion levels, a summar y of errors encountered, and the length of time the Motorola Netopia® Gateway
has been running since it was last restar ted. Identical to the
status command.
show summary
Displays a summar y of WAN, LAN, and Gateway information.
show vlan
Displays detail of VLAN status and statistics.