Motorola Netopia 3397GP - Manual (Page 11)

11
Configure Your PC for Dynamic Addressing
The following instructions assume that you want to use the automatic configuration and address shar-
ing features of the Gateway to provide IP information to devices on your Local Area Network. To connect
additional computers that will use the Gateway’s address sharing feature repeat these steps for each
computer.
Microsoft Windows:
1.
Navigate to the TCP/IP Properties Control Panel.
Then go to Step 2.
2. Select Obtain an IP address automatically.
3. Select Obtain DNS server address automatically, if available.
4. Remove any previously configured gateways, if applicable.
5. Click the OK button. Restart if prompted.
Proceed to the next section “Motorola Netopia® Gateway Quickstar t” on page 14 .
a. Some Win-
dows versions
follow a path
like this: Start menu -> Settings -> Control
Panel -> Network (or Network and
Dial-up Connections -> Local Area
Connection -> Properties ) -> TCP/IP
[your_network_card] or Internet Pro-
tocol [TCP/IP] -> Properties
b. Some Win-
dows versions
follow a path
like this: Start menu -> Control Panel ->
Network and Internet Connec-
tions
-> Network Connections ->
Local Area Connection -> Proper-
ties -> Internet Protocol [TCP/IP]
-> Properties