MITSUBISHI ELECTRIC WT03939X20 - Manual (Page 54)

53
3.12.2 Design of Screen
There are two kinds of following screens to the Error notification mode setting/cancellation screen.
(1) Maintenance mode -- When the MN Converter is in maintenance mode
(2) Remote error notification mode -- When the MN Converter is in remote error notification mode
[Maintenance mode screen]
All the settings are blank and the [Settings contents monitor], [Test report] and [Send cancel all]
buttons are disabled.
[Remote error notification mode screen]
Monitors and displays the settings from the MN Converter.
If the connection status monitor has not been implemented, ” “ appears in the "Units targeted
for error monitoring" fields.
*