MITSUBISHI ELECTRIC WT03939X20 - Manual (Page 6)

5
1.2 Required Operating Environment
This manual refers to Windows
®
2000 as Windows 2000, and Windows
®
XP as Windows XP.
1.2.1 Hardware Requirements
The computer must be IBM compatible on DOS/V and capable of satisfying the following requirements.
* Required environment
- OS .............…...... Windows2000 or WindowsXP (Recommended English version *1)
- CPU…..........…..... Desktop:Celeron 1GHz
Notebook:CeleronM 1GHz
- RAM .............…… Minimum 512 MB
- HDD ….............…. Available space 40GB (Ultra ATA compatible 5400r.p.m.) *2
- LCD ............…….. Display resolution:XGA(1024x768)
- Serial port ............ 1 RS232C serial port (Used when connecting via MN converter)
- USB port ............ 1 USB port (Used when connecting via MN converter CMS-MNG-E) *4
- LAN port............... 1 LAN port (10BASE-T)
- Optical drive.......... 1 CD-ROM drive (Used when installing the Maintenance Tool to a PC)
- Pointing device..... Mouse or track ball or any other pointing device
* Recommended environment
- OS ....……........... Windows2000 or WindowsXP (service pack2)(Recommended English version *1)
- CPU …................. Desktop: Pentium4 2GHz
Notebook: PentiumM 1.6GHz
- RAM .....……........ 1GB or more
- HDD …................. Available space 120 GB (SATA compatible 7200r.p.m) *2
- LCD .......……....... Display resolution:XGA(1024x768) or more
- Serial port.........… 1 RS-232C serial port (Used when connecting via MN converter)
- USB port ............ 1 USB port (Used when connecting via MN converter CMS-MNG-E) *4
- LAN port .............. 1 LAN port (10BASE-T or faster) *3
- Optical drive......... 1 CD-ROM/CD-RW or DVD drive
(Used when installing the Maintenance Tool to a PC)
- Pointing device..... Mouse or track ball or any other pointing device
*1 About OS
Fundamentally, it corresponds to OS of each country. However, separators of time and date differ in
each language. This separator may affect a maintenance tool.
It recommends using it by English OS and Regional options setup, changing into English area form. Or
it recommends using it, changing date separator into [/] and time separator into [:].
*2 About Hard Disk Space
The hard disk space recommended above is only the amount required for installing the maintenance
application. Additional space will be required if the operating data is also to be stored on the hard disk.
Accordingly, there may not be enough memory to store operating data if the maintenance system is
installed in a computer with limited hard disk memory.
*3 About LAN port
An LAN port of G-50A is 10BASE-T.
*4 About USB port
An USB port of MN Converter (CMS-MNG-E) is USB1.1.
NOTE:
TG-2000A and Maintenance Tool cannot operate with the same personal computer.