MITSUBISHI ELECTRIC WT03939X20 - Manual (Page 64)

63
The design of the screen is shown below.
- (1) Site name
Name of the system being monitored [see section 3.12.3 (1)]
- (2) Report result
Results notified
OK --- Notification succeeded
NG(**) ----Notification failed
** : Error code (see below)
01:Modem no-response -- There was no response from the modem.
10:Phone connection error-- A telephone line connection could not be established.
11:Server no-response -- There was no response from the server software.
(Only applies when "Server" is selected in "Option
setting" (see section 3.12.8).)
- (3) No.
Notification number
A number assigned sequentially for each notification. [See section 3.12.9 for details.]
- (4) Address
M-NET address of the unit in which the error occurred.
- (5) Error code
Code for the error that occurred.
- (6) Error contents
Details of the error.
- (7) Log clear
Clears the Report log.
- (8) File output
Saves the Report log as a CSV-format file. [See section 3.12.5.3.]
- (9) Close
Closes the Report log screen.
(7) (8) (9)
(1) (2) (3) (4) (5) (6)
Latest
Scroll bar