Multi-Tech Systems FR111 - Manual (Page 26)

26
2.4 Switch Settings
The 8-position DIP switch located on the right side of the MultiFRAD
only uses the first four positions. The DIP switches are shown in Figure
2-3 and their settings are described in Table 2-1.
DIP-Switches
Figure 2-3. Switch Settings
Table 2-1. Switch Settings
Switch Mode Position Description
1 Cmd/Data UP* Data
DOWN Command
2 Clocking UP* DDS
DOWN Internal
3 Loopback UP* Normal
DOWN Loopback
4 DSU UP FRAD
DOWN* DSU
5-8 Not Used
*Factory default setting