Multi-Tech Systems FR111 - Manual (Page 91)

91
If you don’t know the file name
1. From the Main Menu, type F to access the Files Menu. For a list of file
areas, type L, press ENTER, then type L and press ENTER again. (If
you do not type the second
L, you will list all of the files on the BBS.)
2. Mark each file area you would like to examine by typing its list
number and pressing ENTER.
3. Enter L to list all the files in the selected file areas. Enter C to go
forward in the file list and P to go back.
4. To mark one or more files for download, type M, press ENTER, type
the list numbers of the files, and press ENTER again.
5. Enter D. You will see a list of the files you have marked. Enter E if you
would like to edit the list; otherwise enter D again to start the
download process.
6. Select a file transfer protocol by typing the indicated letter, such as Z
for Zmodem (the recommended protocol).
7. If you select Zmodem, the file will transfer automatically. If you select
another protocol, you may have to initiate the transfer yourself. (In
most data communications programs, the PAGE DOWN key initiates
the download.)
8. When the download is complete, press ENTER to return to the File
Menu.
9. To exit the BBS, type G and press ENTER.
7.5 About CompuServe
In addition to the BBS, Multi-Tech provides support through
CompuServe’s Modem Vendor Forum (GO MODEMVEN). Refer to your
CompuServe documentation for special operating procedures.