Multi-Tech Systems FR111 - Manual (Page 54)

54
5.2.1 Configuration
Data Port
This button allows you configure the data port for either synchronous or
asynchronous mode of operation.
Trunk
This button lets you define the frame relay parameters.
5.2.2 Others
Statistics
This button allows you to view statistics of the trunk port.
Diagnostics
This button allows you to run two loopback tests, a memory test, and watch
dog test.
5.2.3 Download
You can update the MultiFRAD setup on the target. This will bring the
MultiFRAD down for updating the setup. Then, reboot the MultiFRAD.
5.2.4 Exit
This will end your MultiFRAD session and return you to the Program
Manager.