Multi-Tech Systems FR111 - Manual (Page 79)

79
should be less than or equal to the Monitored Event Counter.
The Monitored Event Counter option determines the number of Polling
Intervals that have to take place before the User Network Interface is
operational. It is also used with the error threshold count to determine if
the trunk should be brought down. The range of this counter is from 1 to
10 events with a default of 4 events.
The Encapsulation Mode option depends on the type of device that is
connected at the other end of the trunk. If another MultiFRAD 100 is
connected at the other end of the trunk, then the Mux mode is used. If a
non-MultiFRAD 100 is at the other end of the trunk, then the Raw mode
is used.