Multi-Tech Systems FR111 - Manual (Page 66)

66
5.5 Statistics
This dialog box allows you to view status of the trunk. Its possible to
view signal status and other characteristics like data frames transmitted
or received, status of enquiries transmitted and messages received and
the status of the messages received.
If you want to clear the statistics so that you can have fresh statistics,
then you should click on the clear button.
5.6 Diagnostics
The MultiFRAD Diagnostics dialog box allows you to run two loopback
tests, a memory test, and watch dog test. The Diagnostics dialog box is
displayed by clicking on the Diagnostic button in the MultiFRAD dialog
box.