Multi-Link The Stick Voice/Fax/Modem Call Processor - Manual (Page 10)

Call Grab-If the Call Override feature does not perform due to any line
problems with your local phone service provider, this standard feature
will allow you to override The Stick’s tone detect and call routing
operation. Call Grab can be initiated from any touch tone or pulse
extension phone by dialing "9" on the telephone key pad. When "9" is
dialed, The Stick will immediately cease its call routing function. This
computer modem or data is being transmitted outbound from your
computer modem.
POWER/CALL
STATUS LIGHT
feature is standard and will work regardless of the status of the “Call
Override” feature. Note: Y OU
must enable the “ Pulse Detect ” feature if you want
to grab a call from a pulse dial phone.
Power/Call Status Light---The LED on the front of The Stick demon-
strates two functions-when lit, it tells you the unit is powered up and
while processing inbound and outbound calls, the LED signals which
port is being used. A “one blink” pattern tells you a voice call is being
processed, a repeating “two blink” pattern says The Stick has either
detected CNG tones and is routing the call to your fax machine or a fax is
outbound. A repeating “three blink” pattern denotes the proper security
access code has been monitored and a caller has been routed to your