1) programming and quick reference guide, 7the stick programming and quick reference guide, 0 rings – Multi-Link The Stick Voice/Fax/Modem Call Processor User Manual

Page 12: 8 rings

Advertising
background image

7

THE STICK PROGRAMMING AND QUICK REFERENCE GUIDE

REGISTER # PROGRAMMABLE

FEATURE

PROGRAM
RANGE

FACTORY
PRESET

PROGRAMMING / INSTALLATION
RECOMMENDATIONS

YOUR
PROGRAM

01

FAX Tone Detection

0 = off

1 = on

ON

Regardless of how you install the Stick, if a FAX/PC
FaxCard is used—Program this feature “ON”

02

Protected Hook
Flash

0 = off

1 = on

OFF

With older KEY and PBX systems, you may need to
program this feature “ON”

03

Unanswered Call
Silent Transfer

0 = off

1 = on

OFF

“UCST” routes all unanswered after-hours calls to
fax or modem ports (on any installation)-—
program "ON”

04

Silent Transfer

Destination

0 = fax

1 = modem

FAX

This feature determines what device will receive a
call after it has been “silently transferred”

05

Pulse Detection

0 = off

1 = on

OFF

If you have pulse-dial phones and wish to transfer
or “grab” a call—program this feature ”ON”

06

Call Override

0 = off

1 = on

OFF

If The Stick is installed at a walljack and you want
to answer a call from any extension phone—
program “ON”

07

Unrestricted Manual
Transfer

0 = off

1 = on

ON

Gives transfer ability at any time, from either party
from any phone, recommended programming
“ON”

08

Answering Machine
Silent Transfer

0 = off

1 = on

OFF

After answering machine times out, call will be
routed to fax or modem port (any installation)—
program “ON”

11

Security Access Code
for VOICE Ports

Digits 0-9 *

and #

4 digits max.

*1

This register contains the code for transfer of a
voice or modem call to devices connected to voice 1
& 2 ports

12

Security Access code
for FAX Port

Digits 0-9 *

and #

4 digits max.

*2

This register contains the code for transfer of a
voice or modem call to FAX/PC FaxCard
CONNECTED to fax port

13

Security access code
for MODEM Port

Digits 0-9 *

and #

4 digits max.

*3

This code is usually sent by calling modem—we
recommend programming a 4 digit code for
security purposes

14

Rings to answer

0 to 10 Rings

0 Rings

If the stick is used on a KSU or PBX set to “0” –
home installs w/ext. phone access, program needed
no. of rings

15

Maximum rings

4 to 30 Rings

8 Rings

This feature controls the number of times a device
(voice, fax, modem) is rung by the stick before
dropping the call

Advertising