Multi-Link The Stick Voice/Fax/Modem Call Processor - Manual (Page 11)

The average consumer usually starts to freak when they open up any
product manual and see the word “PROGRAMMING”. We have all
experienced “programming” anxiety with VCR’s, computers, fax
machines . . . ..whatever. Relax. This is relatively painless. All you have to
do is understand each programmable feature and how you want The Stick
to operate in your chosen installation.
On the next page is the Programming and Quick Reference Guide.
This table was developed as an easy reference/record for program features
with corresponding Register Number, programming range of each
feature, the factory preset of each feature (how The Stick works “out of
the box” if you don’t bother to program anything), program recommenda-
tions for certain types of installations and finally, a space for writing
down what you’ve done (or what you want The Stick to do).
Please use the Programming and Quick Reference Guide. Mark on it.
Highlight it. If you can’t remember which Register Number controls
which feature. . . .refer back to it. And take a tip from us, pencil in how
you have programmed all the features. It will save you some time and
frustration.
We advise you to read through the Programmable Features section
again if you are not quite sure of how you want The Stick to operate.