Multi-Link The Stick Voice/Fax/Modem Call Processor - Manual (Page 29)

D) NOT-SO-SIMPLE IN LINE INSTALLATION
Pros:
Total Barge-In Protection !
Cons: You may require the services of a telephone installation guru.
Requires severing the phone line before all existing wall jacks
and installing either modular plugs and an extra modular line
cord
INSTALLED MODULAR
TELEPHONE JACKS
This one can be real difficult due to the materials required and the point
of installation for The Stick. Remember, what we are trying to achieve in
this scenario is “Barge-In Protection". All voice calls are routed to all
phones and fax and modem calls go to their respective devices-without
one being able to access the other.
1) Find a point on the incoming phone line before all wall jacks or
telephone equipment. Sever the phone line.
2) Install two modular wall jacks on each end of the severed phone line.
Make sure you are using the correct pair of wires when connecting the
severed phone line to the modular jacks.
3) Plug one end of the supplied line cord into the port labeled “LINE” on
The Stick and the other end into the first modular wall jack. An
additional line cord will be needed to connect the port labeled
“VOICE 1” to the second modular wall jack.
4)
From this location, additional wiring may need to be run to your fax
machine and computer modem (if located in another room).