Microsoft G7VP2 - Manual (Page 30)

30
2
Hardware Installation
2.9.10 Chassis Fan Connector
The system board is equipped with a chassis fan connector. If you
are installing a fan in the system unit, connect the fan’s connector to
location J7 on the system board. The fan will provide adequate
airflow throughout the chassis to prevent overheating the processor.
Pin
1
2
3
Function
GND
+12V
Sense
2.9.9 CPU Fan Connector
The processor must be kept cool by using a fan with heatsink.
Connect the CPU fan to the 3-pin fan connector at location J8 on
the system board.
Pin
1
2
3
Function
GND
+12V
Sense