Microsoft G7VP2 - Manual (Page 42)

42
3
Award BIOS Setup Utility
The settings on the screen are for reference only. Your version may not be identical
to this one.
3.1.3 Chipset Features Setup
This section gives you functions to configure the system based on
the specific features of the chipset. The chipset manages bus speeds
and access to system memory resources. It also coordinates
communications between the conventional ISA bus and the PCI bus.
These items should not be altered unless necessary. Depending on
your add-in cards, you may not or should not enable some of those
features. The default settings have been chosen because they provide
the best operating conditions for your system. The only time you
might consider making any changes would be if you discovered
some incompatibility or that data was being lost while using your
system.
Software Power-off
Enabled Executing the Shut Down command in Windows  95/98
will shut down the computer.
Disabled Executing the Shut Down command in Windows  95/98
will not shut down the computer.
Note:
If you set jumper JPP to “ATX Power” (pins 1-2 on), make
sure this field is Enabled. Refer to “Jumper Settings for ATX
Power-On/Off Select” in chapter 2 for more information.
: Normal
: Normal
: 3
: Enabled
: Disabled
: Disabled
: Enabled
: Enabled
: Enabled
: Enabled
: Disabled
: Enabled
ROM PCI/ISA BIOS
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
DIMM 1 DRAM Timing
DIMM 2 DRAM Timing
SDRAM CAS Latency
Video BIOS Cacheable
System BIOS Cacheable
Memory Hole at 15M-16M
CPU to PCI Write Buffer
PCI Dynamic Bursting
PCI Master 0 WS Write
PCI Delay Transaction
PCI Master Read Prefetch
Software Power-off
↑ ↓ → ←
ESC
F1
F5
F6
F7 : Quit
: Help
: Old Values
: Load Fail-Safe Settings
: Load Optimal Settings
PU/PD/+/-
(Shift) F2
: Select Item
: Modify
: Color
**** System Health Monitor ****
Current CPU Temperature
Current CPU FAN Speed
Current Chassis FAN Speed
CPU Temperature Limit
CPU FAN Speed Limit
Chassis FAN Speed Limit
+3.3V Voltage
+12V Voltage
+5V Voltage : 27 o C/80 o F
: 4285 RPM
: 4137 RPM
: Ignore
: Ignore
: Ignore
: Ignore
: Ignore
: Ignore