Microsoft G7VP2 User Manual
Page 9
9
1
Introduction
Dual Function Power Button (ATX power supply only)
Depending on the setting in the BIOS setup, this switch will allow
your system to enter the Soft-Off or Suspend mode.
RTC Timer to Power-on the System (ATX power supply only)
The RTC installed on the system board allows your system to
automatically power-on on the set date and time.
Watchdog Timer
The system board is designed for Industrial PC applications. It
supports the Watchdog Timer function allowing your application to
regularly clear the system at the set time interval. If the system
hangs or fails to function, it will reset at the set time interval so that
your system will continue to operate.
Refer to Jumper Settings for
Watchdog Timer in chapter 2 of this manual for more information.
8 step counter (0.5/1/2/4/8/16/32/64 sec)
Virus Protection
Most viruses today destroy data stored in hard drives. The system
board is designed to protect the boot sector and partition table of
your hard disk drive.