Microsoft G7VP2 - Manual (Page 50)

50
3
Award BIOS Setup Utility
3.1.8 Integrated Peripherals
The settings on the screen are for reference only. Your version may not be
identical to this one.
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
Onboard Primary PCI IDE
Onboard Secondary PCI IDE
IDE Prefetch Mode
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
USB Controller
USB Keyboard Support : Enabled
: Enabled
: Enabled
: Enabled
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Enabled
: Disabled
ESC
F1
F5
F6
F7 : Quit
: Help
: Old Values
: Load Fail-Safe Settings
: Load Optimal Settings
PU/PD/+/-
(Shift) F2
: Select Item
: Modify
: Color
↑ ↓ → ←
Onboard FDC Controller
Onboard UART 1
Onboard UART 2
Onboard UART 2 Mode
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
Parallel Port EPP Type
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
: Standard
: 378/IRQ7
: ECP+EPP
: 3
: EPP1.7
3.1.6 Load Fail-Safe Settings
The “Load Fail-Safe Settings” option loads the troubleshooting default
values permanently stored in the ROM chips. These settings are not
optimal and turn off all high performance features. You should use these
values only if you have hardware problems. Highlight this option on the
main menu and press <Enter>. The message below will appear.
Load Fail-Safe Settings (Y/N)? N
If you want to proceed, type <Y> and press <Enter>. The default
settings will be loaded.
3.1.7 Load Optimal Settings
The “Load Optimal Settings” option loads optimized settings from the
BIOS ROM. Use the Setup default values as standard values for your
system. Highlight this option on the main menu and press <Enter>. The
message below will appear.
Load Optimal Settings (Y/N)? N
Type <Y> and press <Enter> to load the Setup default values.