Microsoft G7VP2 - Manual (Page 47)

47
3
Award BIOS Setup Utility
Resume On Alarm
Enabled When Enabled, “Date (of Month)” and “Timer (hh:mm:ss)”
will appear right below this field. You can set the date and
time you would like the Soft Power Down (Soft-Off) PC
to power-on.
Disabled Disables the automatic power-on function. (default)
Date (of Month)
0 The system will power-on everyday according to the time
set in the “Timer (hh:mm:ss)” field.
1-31 Select a date you would like the system to power-on. The
system will power-on on the set date, and time set in the
“Timer (hh:mm:ss)” field.
Timer (hh:mm:ss)
This is used to set the time you would like the system to power- on.
If you want the system to power-on everyday as set in the “Date (of
Month)” field, the time set in this field must be later than the CMOS
RTC’s time.
PM Events
When enabled, access to the specified IRQ will cause the system to
wake up completely from the power management mode. When
disabled, the system will not wake up from the power management
mode despite access to the specified IRQ.