Save & exit setup, Exit without saving, 12 save & exit setup – Microsoft G7VP2 User Manual
Page 56: 13 exit without saving
56
3
Award BIOS Setup Utility
3.1.12 Save & Exit Setup
When all the changes have been made, highlight Save & Exit Setup
and press <Enter>. The message below will appear:
Save to CMOS and Exit (Y/N)? N
Type Y and press <Enter>. The modifications you have made will be
written into the CMOS memory, and the system will reboot. You will
once again see the initial diagnostics on the screen. If you wish to make
additional changes to the setup, press <Ctrl> <Alt> <Esc>
simultaneously or <Del> after memory testing is done.
3.1.13 Exit Without Saving
When you do not want to save the changes you have made, highlight
Exit Without Saving and press <Enter>. The message below will
appear:
Quit Without Saving (Y/N)? N
Type Y and press <Enter>. The system will reboot and you will once
again see the initial diagnostics on the screen. If you wish to make any
changes to the setup, press <Ctrl> <Alt> <Esc> simultaneously or
<Del> after memory testing is done.