Matsushita CF-W4HWEZZBM - Manual (Page 38)

6.2.12. Remove the Drive Unit
Preparation : perform the section 6.2.1. to 6.2.4. first.
1. Peel off the Tape from the Connector.
2. Remove the Drive FFC from the Connector (CN501) and
remove out the Drive Unit.
Tape
CN501
Drive FFC Drive unit
6.2.13. Remove the USB Board
Preparation : perform the section 6.2.1. to 6.2.4. first.
1. Remove the Connector (CN23) on the Main Board.
2. Remove the USB Board from the Bottom Case.
CN23
USB Board
USB Cable
6.2.14. Remove the Antenna Board(L,R)
Preparation : perform the section 6.2.1. to 6.2.11. first.
1. Remove the Antenna Cable (L, R) on the Wireless LAN
Module and then remove the Antenna Board from the
Bottom Case.
2. Remove the DC-IN Cable (CN600) from the Main Board.
CN600
DC - IN Cable
Bottom Case
Antenna Cable (L)
Antenna Cable (R)
Antenna PCB (L)
6.2.15. Remove the Wireless LAN Module
Preparation : perform the section 6.2.1. to 6.2.4. and 6.2.14.
first.
1. Peel off the Tape on the Wireless LAN Module.
2. Open the Wireless LAN Module maintenance arm and
remove the Wireless LAN Module.
Tape
Wireless LAN
Module
Main Board
38