Matsushita CF-W4HWEZZBM - Manual (Page 48)

6.3.8. MODEM Cable, Rib and LAN Cable processing
Main Board
LAN Cable
Modem Cable
Standard size
8mm
Tape is wrapped
Modem Cable
Gasket Cloth
Wrap Gasket Cloth.
Tape
Conductive Cloth affixation of Modem Cable
Process between the
Main Board and the Pin.
and do LAN Cable up.
(Prevent from floating by Modem Cable.)
Process the Modem Cable to
the cutting lack of the Board.
PET
Tape
Process the cable so as not to
come in succession.
PET
Tape
Pin
Pin
Pin
MODEM
LAN
Touch the pin.
Touch the pin.
Draw out RJ cable
straight.
Divide the cable into the center
and paste the tape vertically.
Paste the remainder to an opposite side.
Peel off the both sides tape
flaking off paper and then
fix to the cover.
Process at the
right of the pin.
Do not get on up.
Process under
the pin.
Do not get on up.
Process the remainder
between the pin and the pin.
Process the cable to
the cutting lack part.
Install connector in bottom.
Shut the cap.
48