Matsushita CF-W4HWEZZBM - Manual (Page 52)

6.3.13. Assembly of Touch Pad
The Concave part is inserted
in the hole of a Top Case
Touch Pad
Affixes it according to
the convex positioned part Pressurizing
Hook
Hook
Gasket (PAD)
PAD Button
PAD Seat
Pad Cover
PAD
FFC
Touch Pad
Pin insertion
Top Case
Affixes it according to the inside
concave part edge side
Convex part
Insertion of PAD FFC Installation of Pad Button Affixation of PAD Sheet
Affixation of Touch Pad
Installation of Pad Cover
Insert two places in the convex part
in the ditch of a Top Case and hang
Hooks four places.
6.3.14. Screw tightening procedure of each unit
When serving, the screw tightening is executed according to the undermentioned procedure.
1. Screw tightening of Top Case
1-1. DXQT2+E6FNL(I:N13) is tightened. No.1 to No.3
1-2. DFHE5025XA(L:N1) is tightened. No.4 to No.6
1-3. DXQT2+E6FCL(K:N12) is tightened. No.7, No.8
1-4. DXQT26+D8FCL(J:N16) is tightened. No.9, No.10
1-5. DXQT2+E12FNL(R:N11) is tightened. No.11
1-6. DXQT2+E6FNL(S:N13) is tightened. No.12
Screw (J)
Screw (J)
Screw (I)
Screw (I)
Screw (L)
Screw (L)
Screw (K)
Screw (K)
Screw (I)
Screw (L)
A
Conclude coloring part A pressing when you conclude Screw (K).
Screw (S)
Screw (R)
52