Matsushita CF-W4HWEZZBM - Manual (Page 39)

6.2.16. Remove the MODEM
Preparation : perform the section 6.2.1. to 6.2.4. and 6.2.11.
first.
1. Remove the 2 Screws (O).
Screw(O):DXQT2+D25FNL(N8)
2. Remove the MODEM to the vertical direction from
Connector (CN8) on the Main Board.
Screw (O) Screw (O)
CN18
MODEM
6.2.17. Remove the Card Bus Ejector
Preparation : perform the section 6.2.1. to 6.2.3. and 6.2.11.
first.
1. Remove the 1 Screw (P) from connected side of Main
Board.
Screw(P):DFHE5025XA(N1)
Main Board
Screw (P)
2. Return it on the revers to Card Bus Ejector side.
3. Remove the 2 hooks (C) of the Card Bus Ejector from the
Connector (CN14) and the Card Bus Ejector is removed.
Main Board
Card Bus Ejector
Hook(C)
CN14
39