Matsushita CF-W4HWEZZBM - Manual (Page 43)

PET Tape
Putting of Rear Damper
Putting of PET Sheet
The cable must not run aground on the damper.
Along the LCD Module and put the LCD Cable (Inverter part) with the PET Tape.
Conductive Cloth (LCD cable)
LCD Cable
LCD Cable
(Inverter part)
Damper
Conductive Cloth (LCD cable)
LCD Cable
Rib application putting of LCD Front Case
0
1mm
Externals suiting of Inverter Case
0 1mm
Rear Damper
Processing of Inverter Cable
The cable must not run aground on the cushion.
The cable must not come in succession.
Inverter Cable
The line of the remainder
is put on Hinge (R) side.
Hinge (R)
Put the reflector part surely.
Put on Hinge (R) surely.
Gasket (LCD)
Externals suiting of reflector
0
1mm
Putting of Gasket (LCD)
43