Matsushita CF-W4HWEZZBM - Manual (Page 49)

6.3.9. USB Cable processing
Open space between the Drive Board and the cable.
Process the USB cable on the Drive Board.
Do not multiply the stress by the Drive Board.
Put the cable when there is no space
between the Main Board and the cable
in the Main Board.
USB Cable
Drive Main Board
Process between the pin and the pin. Process between the boss and the HDD.
Process between the pin
and the Main Board.
Fix the substrate
with two pins.
USB Board
HDD FFC
PET Tape
Pin
USB Cable
Boss
6.3.10. Wire Rod processing of Lithium Battery
0 2mm
Tape
Draw out the cable straight.
Paste to round shape of the Bottom Case.
0 2mm
Boss
Process the Antenna Cable between the Lithium Battery and the Boss.
49