Multi-Tech Systems MT5634ZBAV - Manual (Page 102)

User Guide
92
callback modem is unable to establish a connection, it tries again,
up to the number of attempts specified by the
#CBAn command.
6. After the modems reconnect, the following message reappears:
Password>
7. Type the same password that you used to initiate the call. You have
three attempts to enter the password or be disconnected.
8. If the password is valid, the following message appears and the
modems establish a working connection:
OK Connecting
Extension-Entry Callback
Use this procedure when calling from an extension at the callback num-
ber. The password that you use must be set up for an optional exten-
sion-entry callback.
1. Using a data communications program such as HyperTerminal, dial
the number of the callback modem..
2. When the connection is established, the callback modem responds
with the following message:
Password>
3. Type an extension-entry password, press the plus key (+), type the
extension to call back to, and press ENTER You have three at-
tempts or one minute to enter a valid password.
4. If the password is valid, the following message appears and the
modems disconnect:
OK Disconnecting