Multi-Tech Systems MT5634ZBAV - Manual (Page 129)

A Regulatory Compliance
119
Compliance with BABT Requirements
Approved for connection to telecommunications system specified in the
instructions for use subject to the conditions set out in them.
Warning: Interconnection directly, or by way of other apparatus, of
ports marked “SAFETY WARNING see instructions for use” with ports
marked or not so marked may produce hazardous conditions on the
network. Advice should be obtained from a competent engineer before
such a connection is made.
Telephones that connect to the external socket must be approved for
direct connection to the Public Switched Telephone Network (PSTN).
This apparatus has been approved for the use of the following facilities:
• Auto-calling
• Loop disconnect and MF dialing
• Phone number storage and retrieval by a predetermined code
• Operation in the absence of proceed indication
• Automatic storage of last number dialed
• Tone detection-busy
• Auto clear from the originating end
• DTR dialing
• Modem
• PBX timed break register recall
Any other usage will invalidate the approval of the apparatus if, as a
result, it then ceases to comply with the standards against which ap-
proval was granted.