Multi-Tech Systems MT5634ZBAV - Manual (Page 77)

4 AT Commands, S-Registers, and Result Codes
67
Command: #CBFR Callback Failed Attempts Reset
Values: n/a
Default: n/a
Description: Resets the number of failed callback passwords
to 0. This does not reset the number stored in
nonvolatile memory.
Command: #CBI n Local Callback Inactivity Timer
Values: n = 1–255
Default: 20
Description: Sets the time (in minutes) that the modem waits
for a command before forcing the user to enter
the setup password again.
Command: #CBN y=x Store Callback Password
Values: y = 0–29
x = password
Defaults: None
Description: Sets the callback security password for the y
memory location. The password must have 6 to
10 characters, and cannot include the
+ or -
characters.
Command: #CBP n Callback Parity
Values: n = 0, 1, or 2
Default: 0
Description: Sets parity for the callback security messages.
#CBP0 No parity.
#CBP1 Odd parity.
#CBP2 Even parity.