4 at commands, s-registers, and result codes – Multi-Tech Systems MT5634ZBAV User Manual
Page 61
4 AT Commands, S-Registers, and Result Codes
51
Command:
E
n
Echo Command Mode Characters
Values:
n = 0 or 1
Default:
1
Description:
E0
Do not echo keyboard input to the terminal.
E1
Do echo keyboard input to the terminal.
Command:
F
n
Echo Online Data Characters
Values:
n = 1
Default:
1
Description:
F0
Enable online data character echo. (Not sup-
ported.)
F1
Disable online data character echo (included for
backward compatibility with some software).
Command:
H
n
Hook Control
Values:
n = 0 or 1
Default:
0
Description:
H0
Go on-hook (hang up).
H1
Go off-hook (make the phone line busy).
Command:
I
n
Information Request
Values:
n = 0–5, 9, 11
Default:
None
Description:
I0
Display default speed and controller firmware
version.
I1
Calculate and display ROM checksum (e.g.,
12AB).
I2
Check ROM and verify the checksum, displaying
OK or ERROR.
I3
Display default speed and controller firmware
version.
I4
Display firmware version for data pump (e.g.,
94).
I5
Display the board ID: software version, hardware
version, and country ID