Mazda 2010 RX-8 - Manual (Page 16)

Black plate (16,1)
(Dial type)
To change the seatback angle, lean
forward slightly while rotating the dial to
the desired position.
(Lever type)
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Make sure the lever returns to its original
position and the seatback is locked in
place by attempting to push it forward and
backward.
CAUTION
When returning a rear-reclined
seatback to its upright position,
make sure you hold onto the
seatback with your other hand while
operating the lever or dial. If the
seatback is not supported, it will flip
forward suddenly and could cause
injury.
qHeight Adjustment (Driver's Seat) í
To adjust the seat height, move the lever
up or down.
Up
Down
2-4
Essential Safety Equipment
í
Some models.
Seats
RX-8_8AT5-EA-09E_Edition1 Page16
Wednesday, April 15 2009 10:32 AM
Form No.8AT5-EA-09E