Mazda 2010 RX-8 - Manual (Page 19)

Black plate (19,1)
CAUTION
Ø The seat-bottom power
adjustment is operated by motors.
Avoid extended operation because
excessive use can damage the
motors.
Ø To prevent the battery from
running down, avoid using the
power adjustment when the
engine is stopped. The adjuster
uses a large amount of electrical
power.
Ø Do not use the switch to make
more than one adjustment at a
time.
qSeat Slide
To slide the seat, move the slide lifter
switch on the outside of the seat to the
front or back and hold it. Release the
switch at the desired position.
NOTE
The seat can be slid rearward by continuously
pressing the switch. In addition, the seatback
also lowers rearward.
Refer to Folding the Seat on page 2-10.
Essential Safety Equipment
Seats
2-7
RX-8_8AT5-EA-09E_Edition1 Page19
Wednesday, April 15 2009 10:32 AM
Form No.8AT5-EA-09E