Mazda 2010 RX-8 - Manual (Page 276)

Black plate (276,1)
4. Say: [Beep]
“Yes”
5. Prompt:
“Please wait. Switching to
French phone book. French selected,
returning to main menu
” (Spoken in
the newly selected language).
Mobile telephone programming
(Pairing)
To use Bluetooth Hands-Free, a mobile
phone equipped with Bluetooth has to be
programmed to the hands-free unit using
the following procedure.
Up to seven Bluetooth equipped mobile
telephones can be programmed to the
vehicle.
NOTE
l A mobile telephone can be programmed
only when the vehicle is parked. If the
vehicle starts to move, the pairing
procedure will end. Programming is
dangerous while driving - pair up your
device before you start driving. Park the
car in a safe place before programming.
l Since the communication range of a
Bluetooth equipped mobile telephone is
about 10 meters (32 ft), if a mobile
telephone is placed within a 10-meter (32
ft) radius of the vehicle, it may be detected/
programmed unintentionally while another
telephone is being programmed.
1. Activate the Bluetooth application of
the mobile telephone.
NOTE
For the operation of the mobile telephone,
refer to its instruction manual.
2. Press the voice recognition/hands-free
switch with a short press.
3. Say: [Beep]
“Setup”
4. Prompt:
“Select one of the following:
Pairing options, confirmation prompts,
select phone, language, or passcode, or
say
“cancel” to return to the main
menu.
”
5. Say: [Beep]
“Pairing options”
6. Prompt:
“Do you want to pair a
phone, delete a phone, or list paired
phones?
”
7. Say: [Beep]
“Pair a phone”
8. Prompt:
“Please say a 4-digit pairing
code.
”
9. Say: [Beep]
“XXXX” (Speak an
arbitrary 4-digit pairing code. This can
be any combination of 4 numbers.)
NOTE
l Some devices accept only a particular
pairing code (Usually,
“0000” or “1234”).
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and
try those numbers if necessary.
l Record the code as it will be used to
program your phone in Step 16.
10. Prompt:
“Pairing code XXXX (4-
digit number). Is this correct?
”
11. Say: [Beep]
“Yes” or “No”
12. If
“Yes”, go to Step 13.
If
“No”, the procedure returns to Step
8.
13. Prompt:
“Start pairing procedure on
phone. See phone's manual for
instructions.
”
14. Using the mobile telephone, perform
a search for the Bluetooth device
(Peripheral device).
6-62
Interior Comfort
Bluetooth Hands-Free
RX-8_8AT5-EA-09E_Edition1 Page276
Wednesday, April 15 2009 10:33 AM
Form No.8AT5-EA-09E