Maxtor NVR-2028 - Manual (Page 22)

20
4.2.3 Alarm Recording
Take the following steps to activate the programmed alarm recording. For ALM OPERATION,
ALM DURATION, MAX REC RATE, and PRE-ALARM settings, please refer to section 5.4 for
more details.
(1) Press the Setup button
to enter the MAIN MENU.
(2) Select ALARM and press the Enter button to enter the ALARM SETTING.
(3) Set the desired ALM DURATION and MAX REC RATE for use.
(4) To activate the alarm recording, set ALM OPERATION to ON. To deactivate it, set ALM
OPERATION to OFF.
(5) To active the motion alarm recording, Select MOTION SETTING and press the Enter button
to enter the MOTION SETTING PAGE, set MOTION ENABLE TO ON, and set a suitable
SENSITIVITY and REGION according to the video sources. (Please refer to the next section
4.2.4)
MAIN MENU
LAN CAMERA
RECORD / BANDWIDTH
CLOCK / TIMER / SEQ
ALARM
COMMUNICATION
DISK
SYSTEM
GOTO ALARM PAGE
ALARM SETTING
ALM OPERATION : ON
ALM DURATION
: 30 SEC
MAX REC RATE : UNLIMIT
PRE- ALARM : OFF
MAIN PAGE
ALARM REC ENABLE