Maxtor NVR-2028 - Manual (Page 45)

43
5.5 COMMUNICATION
This option allows you to configure the status of the RS-232 communication port when connected to an
external device, and the wireless communications settings. (Please refer to the APPENDIX 2 and Network
Function for more details)
WIRELESS:
This entry allows users to set the wireless setting.
OPERATION:
This option is used to configure the wireless operational settings.
ESSID:
This option enables you to change the wireless network name. Unique identifier for the Extended
Service Set (ESS) which is shared by client stations in an infrastructure association, such as the
WLAN-test. It is case-sensitive and cannot exceed 32 characters.
NOTE: If you use more than two NVR units, take care not to use the same ESSID name for
both, since the client device can only connect with one server each time and will
automatically connect with the nearest unit.
MAIN MENU
LAN CAMERA
RECORD / BANDWIDTH
CLOCK / TIMER / SEQ
ALARM
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
COMM SETTING
WIIRELESS : SET
WAN SETTING : SET
NET IP : SET
NET DHCP : SERVER
LEASED IP TABLE : ENTER
IP POOL RANGE : SET
COMM ID : 01
RS232 : ON
MAIN PAGE
WIRELESS SETTING
WIRELESS SETTING
OPERATION : SET
PRIVACY
: SET
LANCAM SETUP : RS232
COMM PAGE
WLAN OPTIONAL SETTING
OPERATIONAL SETTING
ESSID : SET
CHANNEL
: 06
WIRELESS PAGE
SET NETWORK NAME