Maxtor NVR-2028 - Manual (Page 39)

37
AUDIO ENABLE:
(1) Press the Setup button to enter the MAIN MENU.
(2) Select the item termed "LAN CAMERA" and press the Enter button to enter the
LANCAM SETTING page.
(3) Select the item termed "AUDIO ENABLE" and push the Enter button to select the
AUDIO ENABLE.
(4) To activate the motion detection function, set " AUDIO ENABLE" to "ON". To deactivate the
function, set " AUDIO ENABLE" to " OFF" The items termed "OFF" and "ON" switch all the
channels in the AUDIO ENABLE SETTING page off and on respectively as well. If you wish
to select individual channels for sounds, select the item termed " SET" and activates your
desired channels by pressing them "ON" while turning the rest "OFF". After set individual
channels in different modes and then push the Enter button . At once the legends "OK"
and "CANCEL" appear at the bottom of the page. Now press the “<” button and the “>”
button to confirm either "OK" or "CANCEL" respectively. Press "OK" to ratify your
choice(s). If not, press "CANCEL".
MAIN MENU
LAN CAMERA
RECORD / BANDWIDTH
CLOCK / TIMER / SEQ
ALARM
COMMUNICATION
DISK
SYSTEM
LANCAM SETTING
LANCAM SETTING
IP / ACCOUNT
: SET
IMAGE : SET
AUDIO ENABLE : OFF
MOTION : OFF
MAIN PAGE
SET AUDIO ENABLE
LANCAM SETTING
AUDIO ENABLE : OFF
ON
SET
MAIN PAGE
SET AUDIO ON/OFF INDIVIDUALLY
AUDIO ENABLE SETTING
CH1 CH2 CH3 CH4
OFF OFF OFF OFF
CH5 CH6 CH7 CH8
OFF OFF OFF OFF
OK CANCEL