Maxtor NVR-2028 User Manual
Page 33
31
4.5.2 Secure Digital Card (SD Card) Backup Operations
The SD card slot of the rear unit has three functions as shown below:
1.
Archive Single image Clips into SD Card
Please take the following steps to archive a critical image in a SD card.
(1) Insert a SD Card into the SD card slot of the rear unit.
(2) Start playing back the recorded video.
(3) Press the PAUSE button
to freeze the desired pictures.
(4) Press the Setup button
to save the image in the SD Card.
The quantity of pictures that can be stored depends on the SD card capacity. It depends
on SD card capacity how many pictures can be stored. You can have the saved images
printed out in any computer. The image is stored in the JPEG compressed format. If
more than one clip is stored in a SD card, file names will be assigned in sequence as
shown below.
SAVE TO F0000.JPG
SAVE
TO
F0001.JPG
…
SAVE
TO
F000N.JPG
2.
Backup the System setting info into SD Card.
The NVR offers a quick setup method by using a SD card. If a user wants to set many NVR
devices with the same settings, the NVR could save the whole setting in the SD card, then
transfer it to another NVR.
Save the whole setting into the SD card:
Insert a SD card into the SD card slot.
Press the Setup button
to enter the setup mode and select the SYSTEM.
Highlight SYSTEM and press the Enter button
to enter the SYSTEM SETTING page.
Set SD SETUP to SAVE. Then the system setting info will auto save into SD card.
Transfer the system setting info of NVR to another:
Insert the SD card which has stored the system setting info into the NVR.
Press the Setup button
to enter the setup mode and select the SYSTEM.
Highlight SYSTEM and press the Enter button
to enter the SYSTEM SETTING page.
Then set SD SETUP to LOAD.
3.
Updating System Software (Please refer to section 3.4 for more details.)
MAIN MENU
LAN CAMERA
RECORD / BANDWIDTH
CLOCK / TIMER / SEQ
ALARM
COMMUNICATION
DISK
SYSTEM
GOTO SYSTEM SETTING
SYSTEM
OPERATION LOG : ENTER
MENU BACKGND
: 2
BUZZER :
ON
PASSWORD
:
SET
SETUP
PWD
:
OFF
DEFAULT
:
LOAD
SD
SETUP
:
SAVE
VERSION
:
ENTER
MAIN PAGE
VIEW OPERATION LOG