Maxtor NVR-2028 - Manual (Page 77)

75
10.2 The Image Viewer
The Wireless NVR is equipped with a digital watermark. It's a check software which protects
archived images and informs you whether the images have been modified or not. Follow the
instructions below to open an archived image from an SD card or a HDD.
Pop up the START menu from your computer, and point to Programs / Wireless NVR Network
Viewer to open up the program selection page. Click the Image Viewer tag to start the Image
View program. (See a sample screen below.)
This is image integrity-protection software. It not only allows you to view an archived image from
the SD card or HDD of a computer, but also protects an archived image from reproduction or
interpolation. If an image isn't in the original format form of our Wireless NVR, the Image Viewer
will not display the image and instead will send a warning message " Not Correct Image " right
away. Close this message to enable you to see the image now.
1. Click the RELOAD tag to load the images from a path.
2. Click the PRINT tag to get a displayed image printed out from a printer.