Maxtor NVR-2028 - Manual (Page 28)

26
4.4 Search Operations
This section shows you how to access recorded video.
4.4.1 Full List Search
Take the following steps to proceed with the full-list search function.
(1) Press the Search button to enter the search mode.
(2) Select the FULL LIST and press the Enter button to access the complete list of recorded
video.
(3) Highlight the specific recorded video of your requirement and press the Enter button to
display the selected video.
(Key Operation: Press the “ ^ ” and “v” buttons, to select a video; press the “<”
and “>” buttons, to flip over a page.)
NOTE: T: Timer recording; R: External trigger recording; A: Alarm recording.
NOTE: The maximum number of lists, for a respective HDD, is 3000.
NOTE: Press the Display button persistently to hide list.
4.4.2 Alarm list Search
Take the following steps to proceed with the alarm-list search function.
(1) Press the Search button to enter the search mode.
(2) Select the ALARM LIST and press the Enter button to access the complete list of
alarm-event recorded video.
(3) Highlight the specific recorded video of your requirement and press the Enter button to
display the selected video.
(Key Operation: Press the “ ^ ” and “v” buttons, to select a video; press the “<”
and “>” buttons, to flip over a page.)
NOTE: Press the Display button persistently to hide list.
SEARCH
FULL LIST
ALARM LIST
TIME SEARCH
THUMBNAIL
SD CARD
HD 1
1 21-12-02 12:20:23 10.1M
A 2 21-12-02 13:30:16 2.34M
3 21-12-03 14:20:25 2.05M
4 21-12-03 17:20:46 5.32M
5 22-12-03 16:11:55 24. 2M
T 6 24-12-03 13:30:22 36. 6M
7 24-12-03 18:33:54 6.41M
8 24-12-03 19:21:12 92. 3M