Intellinet Network Solutions 509077 - Manual (Page 11)

2.3 reading Memory cards
You can read the
files from a
memory card
through the MFP
print server.
3. MFP Manager
3.1 MFP Server list
MFP Manager can automatically find the MFP print server in the network and show
it in the MFP Server list. You can select an all-in-one printer and click “Connect”
to use the printer as if you had directly connected the printer to your computer
through a USB cable. MFP Manager also displays info about the connection status.
When you don’t want to use the all-in-one printer, click “disconnect” so other users
can use it. If you forget to disconnect, the MFP print server will automatically be
disconnected after five minutes. (You can re-configure the time period: Refer to
the settings below.) If you unplug the USB cable or turn off the all-in-one printer,
the device will not display in the list. After you reconnect the USB cable or turn on
the all-in-one printer, you need to click “Refresh” and “Connect” in MFP Manager
to recover the connection.
11
MFP MANAGER