Intellinet Network Solutions 509077 - Manual (Page 37)

You can configure the MFP Server to automatically get an IP address from the
dHCP server or manually specify a static IP address.
If you need the MFP server to automatically get an IP address from a dHCP server,
select “enable obtain TCP/IP Settings Automatically (Use dHCP/ BooTP).” You
also can select “disable Use the following TCP/IP Settings” to manually assign an
IP address, subnet mask and gateway for the MFP server.
5.4.4 Save Settings
After configuring the MFP server, click “Save Settings” to save the settings and re-
start the system.
5.5 System tools
5.5.1 load default
You can use this screen to restore the factory default settings. NOTE: All of your
previous setting will be cleared.
7
WEB MANAGEMENT