Intellinet Network Solutions 509077 User Manual

Page 33

Advertising
background image

tcP/iP Printing (lPr/iPP/rAW): The MFP server supports the TCP/IP network

protocol and lPR/IPP/RAW printing protocols. By default, these protocols are

enabled.

5.4.2  Wireless

If you want to use the MFP server through a wireless lAN, set up the MFP server

through Ethernet first and make sure your wireless LAN setting is correct. After

setting the wireless lAN, unplug the ethernet cable and restart the MFP server.

Then you can start to use the MFP server through the wireless lAN. If the

wireless configuration doesn’t work, plug in the Ethernet cable again, re-start the

MFP server and configure the MFP server through Ethernet until the wireless LAN

settings are correct.

You can enable/disable the wireless function and set up the wireless parameters

— including Function and eSSId — for the MFP server from here. You can

manually set the wireless network that you want to connect on this screen or use

the Site Survey screen to automatically search for an available wireless network

and associate with it.
Function: Allows you to disable, enable or let the MFP server auto-select to

connect to a wired or wireless network. If “disable” is selected, the MFP server

can only connect to the network through wired ethernet. If “enable” is selected,

the MFP server can only connect to the network through a wireless lAN. If

“Auto” is selected, the MFP server can automatically decide to enable or disable

the wireless function.

The MFP server only can work in ethernet or wireless lAN mode. It can’t work

in both ethernet and wireless lAN mode at the same time. When the MFP

server starts up, it will auto-detect if the lAN port is connected to an active

network by an ethernet cable. If the MFP server is connected to an active

network by ethernet cable when starting up, the MFP server will run in ethernet

mode. If the MFP server is not connected to an active network by ethernet

cable when starting up, the MFP server will run in wireless lAN mode. The

MFP server default mode is “Auto.”



WEB MANAGEMENT

Advertising