Intellinet Network Solutions 509077 - Manual (Page 7)

1. MFP Print Server ModeS
The 1-Port MFP USB Wireless Print Server supports two modes: All-in-one MFP
Server mode and MFP Server mode. Users can choose one of these modes to
share all-in-one or other printer functions through the MFP print server.
All-in-One MFP Server Mode
The MFP print server can communicate with an all-in-one printer as if it were
connected directly to your computer. This enables users to connect to the all-in-one
for sharing print, scan, card reader and fax functions (if available). The supported
operating systems in this mode are Windows 2000 SP4 and above, Windows XP
SP1 and above, and Windows Vista 2 and Vista 64. The All-in-one MFP Server
mode doesn’t support Windows 98Se/Me/NT, linux/Unix or MAC oS. For detailed
instructions, refer to the following chapters in this manual:
2. Using the All-in-one Printer
. MFP Manager
MFP Server Mode
The MFP print server also supports lPR, IPP and RAW printing protocols, which
enable users to share the print function from an all-in-one printer. The supported
operating systems are Windows 98Se/Me/NT/2000/XP/Server 200/Vista, and
MAC oS 9.x and above. For detailed instructions, refer to the following chapters:
6. lPR Printing
7. RAW Printing
8. IPP Printing
9. MFP Print Server Installation in MAC oS
7
MFP PRINT SERVER MODES