Intellinet Network Solutions 509077 - Manual (Page 17)

general Settings
Run MFP Manager when
Windows starts
execute MFP Manager when Windows starts every
time. By default, it is enabled.
Minimized when starting
MFP Manager
Minimize MFP Manager to an icon in the system tray
when you start MFP Manager. By default, it is enabled.
Refresh status every xx
seconds. (5–00)
Set up the refresh interval for device status update. By
default, it is enabled.
Your Contact Information enter your contact information here. When you connect
to the all-in-one printer, your contact information will be
displayed on the right side of the program for other
users to contact you.
3.5.2 Search for an MFP Server
If a particular MFP server is
not in the same network as
your computer, you can
enter the IP address of the
MFP server to do a remote
search. The MFP server in
the Remote MFP Server list
will be added to the MFP
Server list for you to
configure. NOTE: If the
remote MFP server you’ve searched for is behind a NAT router, the MFP server
may not operate normally.
4. Server conFigUration
4.1 introduction
This chapter introduces the MFP print server’s system configuration utility in a
Windows environment. This utility provides the most complete management and
configuration functions on the MFP server side. This utility only provides configuration
functions for the MFP server itself; it does not include configuration functions for
the client side or other file servers in the network environment.
The Configuration utility provides these configuration and management functions:
• Search MFP Server: Search all available MFP servers on the network.
• Status: display MFP server network status.
• General Configuration: Configure general settings about the MFP server, such
as server name and password.
• TCP/IP Configuration: IP address and DHCP server configuration.
• System Configuration: MFP server network ability setting and firmware upgrade.
• Wireless Configuration: Search for the available wireless networks and configure
the wireless settings of the MFP server for the wireless connection.
• MFP Server Management: For administrators to manage the MFP server.
Administrators can force-disconnect the current connection of the MFP server.
• Report: list the information of all available MFP servers on the network.
17
SERVER CONFIGURATION